Doremi DSDI-20s - Manual (Page 18)

Figure 11: “OSD Settings” Window Example
When the appropriate settings are done, press “Exit” on the remote controller to go back to the
main menu items selection presented at the beginning of Section 5. Then, press “Exit” a second
time to exit the OSD menu, or select another menu item as presented in this Section 5.
5.4 SDI Settings
To enter the SDI Settings window presented in Figure 12, go to the SDI Settings icon of the
menu using the remote controller arrows – see Figure 5 - and hit “Select” – see Figure 1.
Depending on the DVI20-device, the SDI Settings window will allows you to choose the link color
(“RGB”, “YPbPr” and “XYZ’”) and/or the SDI output format (“1080i”, “1080p”, “720p”, “SD”) and
the frame rate (“23.98”, “24”, “25/50”, “29.97/59.97”, “30/60”).
Use the remote controller arrows to choose the appropriate setting and hit “Select”.
Figure 12: “SDI Settings” Window Example – HDVI-20s
DVI.OM.000262.DRM Page 18 of 33 Version 1.4
Doremi Labs