Doremi DSDI-20s - Manual (Page 19)

Figure 13: “SDI Settings” Window Example – XDVI-20
When the appropriate settings are done, press “Exit” on the remote controller to go back to the
main menu items selection presented at the beginning of Section 5. Then, press “Exit” a second
time to exit the OSD menu, or select another menu item as presented in this Section 5.
5.5 DVI Output Settings
To enter the “DVI Output Settings” window presented in Figure 14, go to the DVI Output Settings
icon of the menu using the remote controller arrows – see Figure 5 - and hit “Select” – see Figure
1.
The “DVI Output Settings” window allows you to set DVI parameters using the arrows. Use the
remote controller arrow to choose the appropriate setting and hit “Select”.
Figure 14: “DVI Output Settings” Window
When the appropriate settings are done, press “Exit” on the remote controller to go back to the
main menu items selection presented at the beginning of Section 5. Then, press “Exit” a second
time to exit the OSD menu, or select another menu item as presented in this Section 5.
DVI.OM.000262.DRM Page 19 of 33 Version 1.4
Doremi Labs