Doremi DSDI-20s - Manual (Page 15)

To choose one of these four formats, go to its icon using the remote controller arrows – it will be
displayed in blue – and hit “Select”:
Figure 6: “Input Selection” Window Example
When the appropriate setting is done, press “Exit” on the remote controller to go back to the main
menu items selection presented at the beginning of Section 5. Then, press “Exit” a second time
to exit the OSD menu, or select another menu item as presented in this Section 5.
5.2 Picture Settings
To enter the Picture Settings window presented in Figure 9, go to the “Picture Settings” icon of
the menu using the remote controller arrows – see Figure 5 - and hit “Select” – see Figure 1.
The “Picture Settings” window allows you to set different picture parameters which belong to four
main groups:
 Display
 Image
 Position
 Color
Each main group allows you to change one Picture parameter according to the description
provided in the following table:
Main Group Parameters list
DISPLAY Access to: Brightness, Contrast, Hue, Saturation and Flesh Tone settings
IMAGE Access to Scaling, Adaptive De-interlacing, Noise Reduction, Auto-Filtering, Film
Mode Detect and Sharpness settings
POSITION Access Input Horizontal and Vertical Frame Offset and Horizontal and Vertical Flip
Control
COLOR Access to sRGB, Gamma Correction, Color Temperature, Red, Green and Blue
settings
DVI.OM.000262.DRM Page 15 of 33 Version 1.4
Doremi Labs
HD-SDI input format
selected