Doremi LE100 - Manual (Page 9)

LE1.OM.002066.DRM Page 9 of 52 Version 1.1
Doremi Labs
2
Overview
The LE100 is a device designed to receive, record, decode and distribute live MPEG2 or H.264
media streams. There are two models available, LE100 and LE100-SR. LE100 accepts
streaming media in an MPEG2 Transport stream via Ethernet. In addition to Ethernet streams,
LE100-SR contains an optional satellite input and can receive DVB-S/DVB-S2 signals via
satellite feed.
Both LE100 models can save the incoming streams and wrap them in Digital Cinema Package
(DCP) format. It can record and play DCP's simultaneously allowing the user to play the files at
a later time or move the DCP's to another screen for an encore performance.
Alternatively, MPEG2 and H.264 DCP’s created with Doremi Content Manager software can be
ingested via USB. All content on the LE100 is stored on the internal hard drive and video
decoding is performed by the hardware. The LE100 can output directly to a display device
through HDMI or 3GSDI. LE100's can also re-distribute or forward the incoming stream to other
devices via Ethernet.
Configuring the LE100 network consists of three methods, which includes the Web GUI,
Command Line Interface (CLI), and USB flash drive (mainly used to “rescue” the device in case
of a system failure).
Note: For the purpose of this manual, everything applicable to the LE100 model is also
applicable to the LE100-SR model, unless indicated otherwise.
2.1 Device Overview
The LE100 has several ports on the back panel that perform specific functions:

2x HDMI Out

2x 3G-SDI Out

4x AES Digital Audio Out

2x USB Ports

2x Ethernet Ports

Serial Port
Figure 1: LE100 Back Panel I/Os
Debug
Port
2 x HDMI Out 2 x 3GSDI Out 2 x USB Ports
4 x AES Out
Ethernet Ports
0 and 1