Doremi LE100 - Manual (Page 7)

LE1.OM.002066.DRM Page 7 of 52 Version 1.1
Doremi Labs
PROTECTING YOURSELF AND THE LE100
Never touch the AC plug with wet hands. Always disconnect the LE100 from the power supply
by pulling on the plug, not the cord. Allow only a Doremi Labs dealer or qualified professional
engineer to repair or re-assemble the LE100. Apart from voiding the warranty, unauthorized
engineers might touch live internal parts and receive a serious electric shock. Do not put, or
allow anyone to put any object, especially metal objects, into the LE100. Only use an AC power
supply. Never use a DC power supply.
If water or any other liquid is spilled into or onto the LE100, disconnect the power and call a
Doremi Labs dealer. The unit must be well ventilated and away from direct sunlight. To avoid
damage to internal circuitry, as well as the external finish, keep the LE100 away from direct
sources of heat (heater vents, stoves, radiators). Avoid using flammable aerosols near the
LE100. They can damage the surface area and may ignite. Do not use denatured alcohol, paint
thinner or similar chemicals to clean the LE100. This can damage the unit.
Modification of this equipment is dangerous and can result in the functions of the LE100 being
impaired. Never attempt to modify the equipment in any way. In order to ensure optimum
performance of the LE100, select the setup location carefully and make sure the equipment is
used properly. Avoid setting up the LE100 in the following locations:
 In a humid or dusty environment

In a room with poor ventilation
 On a surface which is not level
 Inside a moving vehicle where it will be subject to vibration
 In an extremely hot or cold environment
Caution
 Battery is located on the motherboard
 Danger of explosion if battery is incorrectly replaced

Replace only with the same or equivalent type recommended by the manufacturer
 Dispose of used batteries according to the manufacturer’s instructions
For LE100-SR, due to the presence of Satellite card, equipment is intended to be installed
by a service person and has installation instructions that require the equipment to be
connected to a socket-outlet with a protective earthing connection.