Doremi LE100 - Manual (Page 11)

LE1.OM.002066.DRM Page 11 of 52 Version 1.1
Doremi Labs
3
Configuration
3.1 Items to Configure
All the items mentioned below must be configured for the LE100 to work properly:
 Network configuration:
o IP address
o Netmask
o Gateway
o Unicast or Multicast UDP/IP
3.2 Hardware Configuration
Before beginning the network configuration, the user must set up the LE100's hardware and
cable connections.

Once the LE100 is taken out of the package, set it on a firm surface and connect the
single power supply cable from the unit to a reliable power source.

Connect an Ethernet cable from the LE100 to the desired network.
Depending on the specific setup and intended usage, one or more of the following connections
can be made:

Connect a Serial port cable from the LE100 to the computer.

Connect the HDMI cable from the LE100 to the display device.

Connect the HDSDI cable from the LE100 to the display device.

Connect the digital audio cable from the LE100 to the desired audio device.