DekTec DTC-379 C2Xpress - Manual (Page 5)

© 2010 - 2015 DekTec Digital Video BV Page 5/18 DTC-379 C2Xpress Manual
Essential Tools for Digital-TV Professionals February 2015
DTC-379 C2Xpress
A dialog appears that allows you to specify all parameters, to save and load parameter sets from
file, and to start generation of the DVB-C2 signal.
5.2. C2Xpress Application Layout
1. Menu Bar
The top area of the C2Xpress application contains two menus: File and Help.
2. Tool Bar
This area contains the following commands: New File, Open File, Save File, Close File, Clear,
Generate output and Cancel. This area also displays the name of the C2Xpress -settings file.
3. General DVB-C2 Parameters
This area allows you to set the general DVB-C2 parameters.
4. Frame Information
This area displays the DVB-C2 frame information.
5. Output Settings
This area allows you to specify the name, location, size and the format for the generated signals.
6. Data Slice and PLP Parameters
This area allows you to specify the Data Slice and PLP parameters and to select the Transport Stream
source for each PLP.
7. Notches
This area allows you to specify Notch bands.
8. PAPR Parameters
This area allows you to specify the Peak-to-Average-Power-Ratio (PAPR) reduction parameters.
9. Channel Fading
This area allows you to add noise to the output signal and to specify multiple simulated fading
paths. For each path you can specify the channel-simulation parameters.
1
2
8
9
3 4
11
5
7
6
8
10 10