DekTec DTC-379 C2Xpress - Manual (Page 3)

© 2010 - 2015 DekTec Digital Video BV Page 3/18 DTC-379 C2Xpress Manual
Essential Tools for Digital-TV Professionals February 2015
DTC-379 C2Xpress
Revision History
Revision Date Changes
V1.15.0.50 2015.02.23 Added support for DVB-C2-version and Early Warning signalling
V1.14.0.48 2014.04.24 Added DTA-2115 support
V1.13.0.47 2013.03.29 Added support for 16MHz RF-signal generation with the DTA-2111
V1.12.3.43 2013.02.21
Fixed BUFS and BUFSTAT field in case HEM=false and NDP=true
Fixed problem if type 1 and type 2 data slices are mixed
Fixed problem if Header Counter=2-Frames and Modulation=16 or 64QAM
Fixed order of ISSY fields in the first C2-frame
V1.12.1.41 2012.06.11 Fixed IQ output to file
V1.12.0.40 2012.05.15 Based on new DTAPI and driver
V1.11.3.39 2011.12.09 Added additional error checking
V1.11.2.38 2011.08.17
Added display of total play out time
Increased valid range for output delay parameter
Added continuity count correction and PCR adaption after TS-file looping
Fixed FIFO underflow errors when running C2Xpress for a long period
Fixed “Implementation limitation” error
V1.10.0.35 2011.04.21
Added option for generating a part of the spectrum of a C2-System
Added support for L1 parameter updates
Updated big-TS splitting
V1.9.1.32 2011.03.17 Fixed problem when using L1 TI mode: 4 or 8 symbols
V1.9.0.31 2011.02.17
Added support for DTA-2111
Added OFDM symbol filtering
Fixed SDT-Other generation in common PLP
Removed .NET 2.0 SP2 dependency
V1.8.0.30 2010.12.21
Added test point data output
Fixed 4K-QAM RF-signal problem
Fixed (re)start generation without RF-signal
V1.7.0.27 2010.12.03
Improved MPLP and ISSY supported
Added ACM test option
Added experimental support for 16K QAM and 64K QAM
Added “Notch test” parameter to allow out of range notches
Added “L1 part2 change counter” parameter
Fixed narrow band notch width
Fixed zero length data slices
V1.1.0.19 2010.08.30
Added peak-to-average power reduction
Incorporated DVB-C2 V1.1.2 specification changes
Added support for DTA-116 and DTA-117
Fixed bitrate when ISSY is enabled
V1.0.1.17 2010.04.19 Fixed detection of capable output adapters
V1.0.0.16 2010.03.16 Initial version