DekTec DTC-378 T2Xpress - Manual (Page 21)

© 2009-2015 DekTec Digital Video BV Page 21/27 DTC-378 T2Xpress Manual
Essential Tools for Digital-TV Professionals February 2015
DTC-378 T2Xpress
7.10.1.2. TS-File
In case TS-File is selected, this dialog allows you to specify the Transport Stream file and optionally
to specify “Big-TS” splitting. Three modes of Transport Stream insertion are supported.
- Mode
Mode Description
Complete Stream The complete contents of the selected Transport Stream file is
included in the PLP
Partial Stream Data Extraction One service from the selected Transport Stream file is extracted from
the file and included in the data PLP. The included data comprises
the service components, the PAT, the SDT-actual and the PMT-table.
Partial Stream Common Extraction All common data related to the selected services in the same PLP
group is extracted from the Transport Stream file and included in the
common PLP. This common data is co-timed with the data in the
data PLPs.
- Path
Path of the selected Transport Stream file
- File bitrate
If possible the bitrate is estimated automatically; otherwise the bitrate has to be specified.
- Service
If the Mode is set to ‘Partial Stream Data Extraction’, this parameter specifies the service that will
be extracted from the “Big-TS” and included in the data PLP
- New TS ID
If the Mode is set to ‘Partial Stream Data Extraction’, this parameter specifies the Transport
Stream ID that will be used in the PAT and SDT tables that are included in the data PLP