Aux parameters, Frequencies, Dtc-378 t2xpress – DekTec DTC-378 T2Xpress User Manual
Page 13

© 2009-2015 DekTec Digital Video BV
Page 13/27
DTC-378 T2Xpress Manual
Essential Tools for Digital-TV Professionals
February 2015
DTC-378 T2Xpress
7.7. AUX Parameters
This group of parameters allows you to specify the insertion of additional auxiliary streams.
AUX parameter
Parameter
Description
#Dummy streams
The number of additional dummy auxiliary streams inserted.
7.8. Frequencies
This group of parameters allows you to specify the RF channels. Default a T2 system has a single RF
channel. For a Time-Frequency Slicing (TFS) system, multiple RF channels can be specified.
TFS parameters
Parameter
Description
#RF
The number of RF channels. In case no TFS is used, this should be set to 1
Start idx
Specifies the index of the starting frequency
Channel 0
The centre frequency of RF channel 0 in Hz
Channel 1
The centre frequency of RF channel 1 in Hz
Channel 2
The centre frequency of RF channel 2 in Hz
Channel 3
The centre frequency of RF channel 3 in Hz
Channel 4
The centre frequency of RF channel 4 in Hz
Channel 5
The centre frequency of RF channel 5 in Hz
Channel 6
The centre frequency of RF channel 6 in Hz