T2-mi over asi output settings, Dtc-378 t2xpress – DekTec DTC-378 T2Xpress User Manual
Page 16

© 2009-2015 DekTec Digital Video BV
Page 16/27
DTC-378 T2Xpress Manual
Essential Tools for Digital-TV Professionals
February 2015
DTC-378 T2Xpress
- Offset
Time offset added to the DVB-T2 timestamps.
7.9.3. T2-MI over ASI Output settings
In case the output type T2-MI over ASI is selected this area allows the selection of the ASI output
adapter and the Transport-Stream parameters.
T2-MI over ASI settings
- Ext. time ref.
External time reference clock used; when checked the T2-MI stream is synchronized with the
Windows system time.
Note: In this case Windows system time has to synchronize with the external time reference.
- Encode FEF
If checked outputs a FEF part composite packet with the required subpart; otherwise, only
outputs a FEF part NULL packet when FEF is enabled.
- TS rate
The rate of the output Transport Stream.
- Data PID
The PID of the Transport Stream packets carrying the T2-MI data.
- PMT PID
The PID of the PMT-table that refers to the T2-MI data stream. If a PMT PID is specified a PAT-
table is also added to the stream. If None (-1) is selected, no PAT-table and no PMT-table are
added to the stream.
- PCR PID
The PID of Transport-Packets carrying the PCR samples. PCR-samples can be added to the T2-MI
stream to make the play-out and modulator synchronisation (bitrate estimation) easier. If None (-
1) is selected, no PCR-samples are added to the stream.
- Timestamps
The DVB-T2 timestamps in the T2-MI stream: None, Relative or Absolute.
- Offset
Time offset added to the DVB-T2 timestamps.