Dataman Vali-Flash 2.0 - Manual (Page 8)

Dataman Vali-Flash User Manual
Page 8 of 13
Save: To read a CompactFlash device and save the image to your PC’s hard disk, click
the load button. You will then be prompted to enter a filename and path for your saved
image file. Once this has been entered, the software will read the device and make a
saved copy of the image to the folder you specified on your hard disk. Note: This
function is only available on the “M” version of the software, contact Dataman for
more information.
Burn: To program or burn a CompactFlash device from a saved image on your hard disk,
insert a blank CompactFlash device into the card reader socket and click the burn button.
You will then be prompted to enter the filename and path of your saved image file that
you want to make a copy of. Once this has been entered, the software will read the
specified image file from your hard disk and burn the data into the blank CompactFlash
device you have inserted in the reader. Make sure that you insert the proper size
CompactFlash device for the size image file you are attempting to duplicate. Note: This
function is only available on the “M” version of the software, contact Dataman for
more information.
NOTE: Never remove the CompactFlash device from the reader when the BUSY
LED is lit. Doing so may damage the reader and/or the device under test. Before you
remove the card reader, you must eject the hardware from within Windows.