Dataman Vali-Flash 2.0 - Manual (Page 4)

Dataman Vali-Flash User Manual
Page 4 of 13
SOFTWARE REGISTRATION
Once the software has been installed, you will need to register this product. When you
run the software for the first time you will see a screen similar to the following:
To register your product, simply call our Support Hot Line at (800) 328-2336 and give
them the 8-digit Site Code that appears in the Site Code block. You will notice that the
Application Status block will display “LOCKED”. Once you have given them the site
code, they will issue you an Init Code that will unlock your software. Enter the init code
they give you in the Init Code block and click Continue. You will notice that the
Application Status block will display “UNLOCKED”. To launch the software just click
on “Enter Application” button then “Continue”. This completes the registration process
for your product.
NOTE: PLEASE BE SURE TO RECORD YOUR SITE CODE AND INIT CODE
IN A SECURE LOCATION TO ENSURE SOFTWARE REGISTRATION AND
LICENSE. THE END USER IS RESPONSIBLE FOR RETAINING THEIR SITE
CODE AND INIT CODE. LOSS OF THESE CODES WOULD REQUIRE A NEW
VALI-FLASH SOFTWARE PURCHASE.