Wifi – CUE smartCUE Interfaces User Manual

Page 28

smartCUE Interfaces | User Manual | Admin Web

WiFi

This section is applied for wireless models only.
Insert an Network name (SSID). It is the name of the

network you want to access. It is used to identify different

wireless networks. It is case-sensitive and must not

exceed 32 alphanumeric characters, which may be any

keyboard character.
Select Network type Infrastructure or Ad-Hoc.
Select from the list-box the radio channel for the Ad Hoc

network. Configurable only when Network Type is set to

Ad-Hoc. The default value is 9.
Select Security type

▪ None

▪ WEP (Wired Equivalent Privacy 64-bit/128-bit)

▪ WPA-Personal (Wi-Fi Protected Access)

▪ WPA2-Personal (Wi-Fi Protected Access IEEE 802.11i)

Select Encryption type.

▪ TKIP (Temporal Key Integrity Protocol)

▪ AES (Advanced Encryption Standard) sometimes

labeled as CCMP (Counter Cipher Mode with Block

Chaining Message Authentication Code Protocol)

Select Security key.

▪ A WEP key is one of the following:

- 5 case-sensitive characters

- 13 case-sensitive characters

- 10 case-insensitive characters using 0-9, A-F

- 26 case-insensitive characters using 0-9, A-F

▪ A WPA-Personal password must be one of the

following:

- 8~63 case-sensitive characters

- 64 case-insensitive characters using 0-9, A-F

▪ A WPA2-Personal password must be one of the

following:

- 8~63 case-sensitive characters

- 64 case-insensitive characters using 0-9, A-F