Introduction, Overview, Application diagram – CUE CueSiteManager Programmers User Manual

Page 3: 3 overview 3, Monitor, Control

Cue Site Manager / Programmer’s Manual / Introduction

Introduction

Overview

Cue Site Manager (CSM) is a software solution for IT staff and asset management allowing to remotely

monitor and control boardrooms, offices, auditoriums, classrooms, private homes, flats, etc. and their

associated controlled devices. Each site can be identified by name, group and location.

Monitor

The system monitors any system attribute - lights, room temperature, volume, projector lamp life and

power, etc. For each attribute the threshold value and condition can be defined and if this condition is

reached one of the following actions will be triggered

▪ Help request informs administrator that someone on site needs a help. Typically this action can be

triggered using Help button on the touch panel.

▪ Maintenance request informs administrator that some site needs a maintenance. For example projector

air filter needs to be cleaned.

▪ Service request informs administrator that some service is required. For example projector lamp needs

to be replaced.

▪ Security alert informs administrator about some security issue. For example projector lost network

connectivity. It can indicate, that projector has been stolen.

All actions described above can be customized to perform the following tasks

▪ Display on administrator application

▪ Send information to predefined e-mail addresses

▪ Write to log file

Control

Each site has set of predefined commands which can be executed by administrator. For example

administrator can switch on / off the projector, set room preset or light scene, etc.

Application Diagram

Central Station / Operator Console

Monitored Site 1

Monitored Site 2

Monitored Site n

Network