CUE CueSiteManager Programmers - Manual (Page 17)

17
Cue Site Manager / Programmer’s Manual / Network Configuration
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
Network Configuration
Monitored Site
CSMDataProvider Driver
CSMDataProvider
Host Unit
LAN
Site Addresses Configuration
Central Station /
Operator Console
LAN
In case the Central Station and CSMDataProvider Host Unit are connected to the same network (LAN), the
same port must be set for Site Addresses Configuration and for CSMDataProvider Driver.
Overview
The Cue Site Manager is a traditional client-server application. The monitored site units are servers and
Central Station is client that accesses monitored site servers. The Monitored Site server never attempts to
connect to a Central Station client.
If a firewall exists between the Monitored Site servers and the Central Station, then an exception (Pinhole)
must be created to allow the Central Station client to communicate on communication port to the servers.
Default value of communication port is 8020 and it can be changed.
Monitored Site Central Station / Operator Console
TCP Client TCP Servers
Firewall exeption
for communication port