Project configuration, Overview, Monitored site – CUE CueSiteManager Programmers User Manual

Page 12: 12 overview 12 monitored site

Cue Site Manager / Programmer’s Manual / Project Configuration

Project Configuration

Overview

Each monitored site can has independent CVC project.
Central Station and all Operator Consoles must be in one CVC project.

Monitored Site

Step 1

Create a new Cue Visual Composer project or open your existing project, where you want to implement CSM

data provider. You must have CVC version 1.54 or later.

Step 2

Insert one CUEunit to your project. For recommended CUEunits see section How CSM Works / Hardware

Compatibility of Software Components.
Name of this unit is Controller1 in the following examples.

Step 3

Set unique IP addresses for all CUEunits.

Step 4

Add the following software components to the project resources

▪ CSMDataProvider (file CUE_CSMDataProvider_CSMDataProvider_Tcp_Server_x.xx.cvcd)

All these components you can find in ZIP file downloaded from

http://www.cuesystem.com/software_application_resources.aspx. You need a login.

Step 5

Create an instance of CSMDataProvider (drag this driver from resources area to configuration tab). Set

instance name to CSMDataProvider1.
The CSMDataProvider1 driver connector must be connected to free TcpServer channel on CUEunit used as

CSMDataProvider Host Unit.

Step 6

Set the properties of driver CSMDataProvider1. Properties are described in the chapter CSMDataProvider

(driver) / Properties.

Step 7

Use functions and events of CSMDataProvider1 as described in chapters CSMDataProvider (driver) / Functions

and CSMDataProvider (driver) / Events.

Step 8

In case the Central Station is connected to different network then monitored site CSMDataProvider Host Unit it

is necessary to set port forwarding rule on the router. See chapter Network Configuration for details.