CUE keypadCUE-8 User Manual
Page 7
2. Clean and degrease the rear glossy part of engraved stripes by denatured alcohol.
3. Remove the release liner from the top part of keypadCUE-8-E.
4. Place the engraved front panel to keypadCUE-8-E, make sure that the buttons can be pushed
easily and then press the panel to stick together with the keypadCUE-8-E. Be as precise as
possible, because it is very difficult to remove the panel once it has been glued.
User Manual keypadCUE-8
www.cuesystem.com
Page 7 of 20