Mounting – CUE keypadCUE-8 User Manual
Page 14
5. Mounting
keypadCUE-8 can be mounted into a standard European electrical wall box with spacing 60 mm
between mounting screws.
Steps:
1. Mount the rear supporting panel to the electrical wall box by two suitable screws.
2. The construction of keypadCUE-8 facilitates secure mounting to the wall using a locking catch.
You can activate this catch by leaning it out of the keypad body by approx. 1 mm with the help
of a screwdriver (see picture below). The locking catch is not activated by default.
User Manual keypadCUE-8
www.cuesystem.com
Page 14 of 20