CP Electronics EBDSPIR-PRM-2CHC - Manual (Page 8)

page 8
LOAD
6A of lighting and or ventilation per channel including incandescent, fluorescent, compact fluorescent, low
voltage (switch primary of transformer).
SUPPLY VOLTAGE
220-240 Volts AC 50 Hz - BOTH CIRCUITS MUST BE ON SAME PHASE
TIME OUT PERIOD Adjustable 10 seconds to 99 minutes
LIGHT LEVEL Light to dark
TERMINAL CAPACITY 2.5mm 2
MATERIAL Flame retardant ABS
TYPE Class 2
TEMPERATURE -10°C to 35°C
CONFORMITY EMC-89/336/EEC
LVD-73/23/EEC
9. Part Numbers
8. Specification
EBDSPIR-PRM-2CHC PIR 2-Channel presence detector, 2-Circuit occupancy switching
EBDSPIR-PRM-2CHL PIR 2-Channel presence detector
Channel 1 - occupancy and lux; Channel 2 occupancy only
(Channel 2 can also be programmed for lux switching via DD-LCDHS)
EBDSPIR-PRM-2CHC/NC PIR 2-Channel presence detector
2-Circuit occupancy switching, normally closed fail safe contacts
EBDSPIR-PRM-2CHL/NC PIR 2-Channel presence detector
Channel 1 - occupancy and lux; Channel 2 occupancy only,
normally closed fail safe contacts (Channel 2 can also be programmed
for lux switching via DD-LCDHS)
DBB
Surface mounting box
DD-LCDHS IR remote control programming handset with LCD screen
UHS IR remote control user handset with lux setting functionality
UHS3 IR remote control user handset with on/off override only
Ref #WD299 Issue 3
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax: + 44 (0) 333 900 0674
www.cpelectronics.co.uk
[email protected]
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE wiring regulations.
Due to our policy of continual product improvement CP Electronics reserves the right
to alter the specification of this product without prior notice.
FM 45789 EMS 534520