CP Electronics EBMPIR User Manual
Ebmpir, Standard & slim-line psu), Product guide

Standard power supply
PIR Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes Red to indicate the following:
RJ11 connector
The sensor head has a flying lead with a RJ11 plug at the
end plugs into the RJ11 socket on the power supply.
Standard power supply
This power supply has a 6A relay. It also has connections
for an external switch that can be used to turn on the load
when absence detection mode has been set or raised /
lowered with dimming variants.
Slim-line power supply
Where space is at a premium the slim-line power supply is
compact and suitable for luminaire mounting where a 2A
relay is sufficient. This power supply does not have
connections for external switches.
Walk Test LED active
when movement is detected
Valid setting received
Sensor head
Lens
which covers...
IR Receiver
Light Level Sensor
Status LED
Slim-line power supply
Dimming version shown
Dimming version shown
Overview
The EBMPIR series of miniature PIR (passive infrared)
presence detectors provide automatic control of lighting
loads with optional manual control.
Three models are available: premium, direct dim, and
analogue dim all of which will switch incandescent,
fluorescent and compact fluorescent lighting. The direct
dim variant controls DALI or DSI digital dimming ballasts
whilst the analogue dim variant controls 1-10V dimming
ballasts.
The unit detects movement using a PIR sensor and turns
the load on. When an area is no longer occupied the load
will switch off after an adjustable time out period.
A selection of fixing clips to allow the unit to me mounted in
or to the side of a luminaire are available
All functionality is fully programmable using an IR handset.
Features
Miniature PIR Presence Detector (luminaire fitting)
EBMPIR
(standard & slim-line PSU)
Product Guide
PIR lens