CP Electronics MWS5 + slim line PSU - Manual

page
1. Description and Operation
Section Contents Page
1 Description and operation 1
2 Dimensions 2
3 Wiring 5
4 Setup 6
5 Programming 9
6 Detection pattern diagrams 11
7 Fault finding 11
8 Specification 12
9 Part numbers 12
The MWS5 series of miniature microwave presence detectors provide automatic control of lighting loads
with optional manual control. The unit comes complete with a selection of fixing clips, allowing unobtrusive
flush mounting of the sensor head into ceiling tiles or on to solid surfaces. It has been designed so that it
can be used for ceiling mounted or wall mounted applications. As microwave radiation penetrates plastic
and glass, this unit has been specifically designed to be mounted inside a luminaire.
Three models are available: non-dimming MWS5, direct dim –DD and analogue dim –AD, all of which will
switch incandescent, fluorescent and compact fluorescent lighting. The direct dim (DD) variant controls
DSI or DALI digital dimming ballasts whilst the analogue dim (AD) variant controls 1-10V analogue
dimming ballasts.
The unit detects movement using a microwave sensor and turns the load on. When an area is no longer
occupied the load will switch off after an adjustable time out period has elapsed.
*for lux, time and sensitivity
Feature
MWS5
(Non-dimming)
MWS5-DD
Direct Dim
MWS5-AD
Analogue Dim
Up to 8m microwave sensing   
3 mounting options   
Lux sensor   
Absence detection   
Presence detection   
Infrared remote setting   
Infrared user handset   
Push button adjustment*   
Relay output   
Dimming output  
Contents
Miniature Microwave Presence Detector + Slim-Line Power supply
Product Guide
MWS5