CP Electronics EBDSPIR-PRM-2CH - Manual

Overview
The EBDSPIR-PRM-2CH PIR (passive infrared) presence
detector provides automatic control of lighting loads with
optional manual control. The detector provides two
independently controlled output channels that can be used
for a variety of applications.

Occupancy of two independent lighting circuits using
a single detector, e.g. for essential and non-essential
supplies.
 Occupancy and lux control of one lighting circuit and
just occupancy control of a second circuit, e.g. where
a row of luminaries by a window is lux controlled
whilst inner rows are switched on occupancy only .
 Occupancy and lux control of a lighting circuit and
just occupancy control of a ventilation circuit .
 Occupancy on both lighting circuits, with separate lux
control on each circuit.
All functionality is fully programmable using an IR handset.
Two variants are available.
EBDSPIR-PRM-2CH
Ceiling PIR presence/absence
detector 2 channel
EBDSPIR-PRM-2CH-NC Ceiling PIR presence/absence
detector 2 channel normally
closed
Features
Front features
Back features
Ceiling PIR presence/absence detector 2 channel
EBDSPIR-PRM-2CH, EBDSPIR-PRM-2CH-NC
Product Guide
PIR Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes Red to indicate the following:
Channel 1 Connector
Live input and output for Channel 1. Switch input
connection that can be used to manually override the lights
on or off.
Channel 2 Connector
Live input and output for Channel 2. Common Neutral
connection.
Walk Test LED active when movement is detected
Valid setting received
Retaining Spring
Retaining Spring
Channel 1
Connector
Channel 2
Connector
Sensor Lens
which covers...
PIR Sensor
IR Receiver
Light Level Sensor
Status LEDs
Mounting Bezel