CP Electronics EBDSPIR-PRM-2CH - Manual (Page 8)

8
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
Technical data
Part numbers
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax: + 44 (0) 333 900 0674
www.cpelectronics.co.uk
[email protected]
Ref: #WD494 Issue 2
FM 45789 EMS 534520
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE Wiring
Regulations and any applicable Building Regulations.
EBDSPIR-PRM-2CH
DBB
Part number Description
Detector EBDSPIR-PRM-2CH Ceiling PIR presence/absence detector 2 channel
EBDSPIR-PRM-2CH-NC Ceiling PIR Presence/Absence Detector 2 channel normally closed
Accessories DBB Surface mounting box
UHS5 Programming IR handset
UNLCDHS Universal LCD IR handset
Dimensions See diagrams opposite
Weight 0.15kg
Supply Voltage 230VAC +/- 10%
Both circuits must on the same
phase.
Frequency 50Hz
Maximum Load 6A of lighting and or ventilation per
channel including incandescent,
fluorescent, compact fluorescent,
low voltage (switch primary of
transformer).
Power consumption On 1.2W, Off 241mW
Terminal Capacity
2.5mm 2
Temperature -10ºC to 35ºC
Humidity 5 to 95% non-condensing
Material (casing) Flame retardant ABS and PC/ABS
Type Class 2
IP rating IP40
Compliance EMC-2004/108/EC
LVD-2006/95/EC