CP Electronics VITMR-MWS3A-PRM - Manual (Page 2)

2
Presence detection
 When movement is detected the load will automatically turn on. When the area is no longer occupied the load will
automatically switch off after an adjustable time period.
In either case, sensitivity to movement of the Microwave sensor can be adjusted using the Sensitivity parameter.
HINT: To assist in setting the Sensitivity, turn on the Walk Test LED which will flash red when movement is detected.
Switch Level On/Off
Occupancy detection can be made dependant on the ambient light level using the Lux On Level and Lux Off Level
parameters.
Detection diagrams
Sensor functionality
Ideal for large office or classroom Ideal for corridor or aisle applications
Ideal for open plan areas and offices
Note. If the range is compromised by the ceiling construction /
material. Add the supplied 20mm spacer ring. See page 4 for
fitting details.