CP Electronics VITM4 - Manual (Page 3)

3
Timer disabled
5 minutes
10 minutes
15 minutes
Time delay settings
SELV switch connector
(observe polarity)
N E L
N E L
Sensor
Detector lead supplied with detector.
Where detectors connect to a single box a dual
lead is available VITM4-LD3-PRM.
Sensor
Automatic on, automatic off
Manual on, automatic off
Low voltage (SELV) wiring
No requirement for:

Containment

RCDs
 No mains voltage switch wires routed along walls removes the need for RCD protection under the IEE 17th Edition regulations.
 The VITM4-SELVMOD module allows switches in parallel for 2-way and intermediate switching.
 Optional time delay function.
 The same switch can be used when multiple Vitesse Modular boxes are connected to different phases.
+ - + -
Momentary or latching switches
(momentary only—push and hold to
reset)
Detector lead supplied with detector.
Where detectors connect to a single box a dual
lead is available VITM4-LD3-B.
Presence detector connections
Absence detector connections
VITM4-SELVMOD Switching Module