COMMELL FS-97A - Manual (Page 29)

FS-97A User’s Manual Hardware Setup
Ethernet Network Interface 29
2.10 < Ethernet Network Interface>
The FS-97A is integrated with one Intel 82562ET PRO/100+ Ethernet interface at the
type of 10Base-T/100Base-TX auto-switching Ethernet with full duplex and IEEE 802.3U
compliant. The optional secondary Ethernet controller is Intel 82540EM PRO/1000+ at the
type of 10Base-T/100Base-TX/1000Base-T auto-switching Ethernet with full duplex and
IEEE 802.3U compliant. The jumper JLAN can let you set to enable/disable onboard
primary network function.
Connector: CN_WOL
Type: onboard 3-pin (1 x 3) wafer connector
Pin 1 2 3
Description WOL-Ctrl Ground +5V Standby
Jumper: JLAN
Type: onboard 3-pin header
1-2 Enable Onboard LAN2 controller
2-3 Disable Onboard LAN2 controller
Default setting
RJ45_1
Intel 82540EM
CN_WOL
JLAN
1 3
RJ45_2
1
3
Intel 82562ET