COMMELL FS-97A - Manual (Page 22)

FS-97A User’s Manual Hardware Setup
Embedded Solid State Disk 22
2.7
The FS-97A supports the IDE-based, bootable and driver free DiskOnModule (DOM)
embedded flash disk. The onboard 40-pin IDE1 and 44-pin IDE2 box header supports
normal DOM (DiskOnModule) or M-systems DiskOnChip IDE Pro flash disk with or without
the additional VCC power cable.
The FS-97A also supports Compact Flash Card Type I/II interface. The jumper JCFSEL
provides you to setup the CF card on master or slave mode.
Jumper: JCFSEL
Type: onboard 3-pin header
JCFSEL Mode
1-2 Master
2-3 Slave
Default setting
Jumper: JDOM
Type: onboard 3-pin header
JDOM Mode
ON IDE1 pin-20 5V power supply enable
OFF No 5V power supply on IDE1 pin-20
Default setting
JDOM
JCFSEL
1 3
CF