COMMELL FS-97A - Manual (Page 19)

FS-97A User’s Manual Hardware Setup
Complete the system Installation 19
2.4.4
After installing the CPU, CPU cooler and the memory module, please slot the main board
into PICMG slot of the backplane carefully. If you connect an ATX power supply with the
backplane, you will need to connect an ATX function cable between the main board and the
backplane. PICMG Bus Slot
Notice:
The ATX function connector
may have different types on
different backplanes, please
check the pin assignment
for the connector on the
backplane before you install
the ATX function cable.
To power supply
JFRNT
CN_PS
To power on the system, please check chapter 2.13 to short the power button pin
on JFRNT.