CIRCUTOR computer SMART Series (Available until stock) - Manual (Page 29)

M98235701-03-12A Computer Smart 6/Computer Smart 12
- 28 -
5.4.1 Functions of the Keys in the Setup Screens
The setup screens will be displayed when the unit is in the Setup state. The setup screens state whether the
parameter edition mode is active or not. This is easy to see, since the parameters that can be edited start
flashing when the mode is active. If the parameter is not flashing, the edition mode is not active and it can not
be edited.
Use the keyboard to browse these screens. The functions of each key displayed on the setup screens are
described next:
Opens and closes the parameter edition screen.
long
Opens the Verification screen.
Closes the Setup state from the Verification screen and opens the Measurement screens
(RUN).
Browses the screens and returns to the previous screen when not in the edition mode.
Returns to the previous setup parameter when in the edition mode.
Browses the screens and opens the next screen when not in the edition mode.
Opens the next setup parameter when in the edition mode.
Displays the next screen in special groups when not in the edition mode, such as: Alarm
Enable (PA1), On/Off/Auto (PC10) and Autotest (PC12).
Increases the value of the configurable parameter or displays the next option when in the
edition mode.
Displays the previous screen in special groups when not in the edition mode, such as:
Alarm Enable (PA1), On/Off/Auto (PC10) and Autotest (PC12).
Returns to the Setup screens when in the Verification screen.
Decreases the value of the configurable parameter or displays the next option when in
the edition mode.
long
The process is started from the Plug&Play screen.
The process is started or stopped from the Autotest screen.
+
long
Opens and closes the Autotest screen.