CIRCUTOR OT2-60D - Manual (Page 17)

DIELECTRIC STRENGTH TESTER FOR ISOLATING OILS OT2-60D --------- Page 17
MODEL SPECIFICATIONS AND OPERATING ENVIRONMENT
OT2-60D
Input 230 V ± 10 % , 50/60 Hz, 3 A, single fase.
Output 0-60kVac, 800VA resistive load, between bushings.
Output Termination Dual Capacitively Graded Bushings.
Oil Test Cells
Available IEC 156
Oil Test Cells
Under demand ASTM D1816, ASTM D877
Operating
Temperature 5
°
C a 40
°
C
Distortion <5%
Meter Accuracy 2% Full Scale.
Kilovoltmeter 3.5 digit LED Escalado 0-60.0 kV AC (RMS)
Dimensions 380mm wide x 360mm deep x 295mm high
Weight (27kg)
Altitude 100% of rating; Sea-level, up to 1500M. The maximum output
voltage is de-rated 5% above 1500M altitude, 10% above
3600M, and 15% above 4500M.
Storage Temperature -10
°
C to 60
°
C, (14
°
F to 140
°
F).
Operating
Temperature 5
°
C to 40
°
C (40
°
F to 104
°
F).
Maximum Relative
Humidity 80% up to 31
°
C(88
°
F), decreasing linearly to 50% at 40
°
C(104
°
F)
Installation Category II
Pollution Degree 2
Table OT2-60D specifications