CIRCUTOR CMBUS series - Manual (Page 15)

5�2�2�- ADDING M-BUS UNITS FROM THE DATABASE
You can add the M-BUS units connected to the CMBUS from the database by following these
steps:
1�- Click on the button to add units to the project ( Figure 10 ).
A list of units from different manufacturers appears together with their pre-configured M-BUS
memory maps ( Figure 12 ).
Figure 12: Database of the different M-BUS units
2�- Select the unit from the list and click OK to add it to the project as a M-BUS slave unit.
( Figure 13 )
You can modify the pre-configured memory map to adapt it to your needs.
15 Instruction Manual
CMBUS