Directed Electronics HVM702A User Manual

Page 9

Press the SEL button on the remote control to the mute the audio, press again to
restore audio.

OTTEE:: If the MENU button on the remote has been pressed prior to pressing the SEL

button, the SEL button now selects a menu item to be adjusted.

U ((A

S))

1. Press the MENU button on the remote to display the following four groups:

2. Use the S/T buttons on the remote to highlight the VIDEO, AUDIO, MODE, or

DISP groups.

3. Press the SEL button to select the desired group. Use the S/T buttons to

select the desired setting to change.

4. Use the W/X buttons to change the setting.
4. If no entry or action is taken within approximately 8-seconds the Menu will

disappear and any changes are saved. Pressing the MENU button will also exit
the adjustments screen.

VIID

RIIG

HTT(ness): 0–15

CCO

OLLO

R:: 0–15

TTIIN

NTT:: 0–15

DIIM

MEER

R:: ON–OFF (In the ON position the LCD screen is dimmed, which

offers better veiwing at night or in dimly lighted envirorments.)

REESSEETT:: YES–NO (This resets the unit back to the factory default settings
for the above adjustments.)

VIDEO

AUDIO

MODE

DISP

Bright

Volume

Full

PAL/NT

Color

Bass

4:3

UP/DN

Tint

Mute

Wide

LET/RIT

Dimmer

H/P

Reset