Directed Electronics HVM702A - Manual (Page 7)

10. Volume control—if the OSD is active, these allow scrolling through menu
options
11. Menu On/Off—press the menu button to go back to the previous selection
12. Scan—used in conjunction with a TV tuner
13. A/M—used in conjunction with a TV tuner
14. TX—not used
15. DIM—dims the LCD screen
16. Up/down button for menu
17. MODE—changes the viewing aspect ratio (Full, 4:3, or Wide)
18. SOURCE—used in conjunction with a TV tuner
19. Remote IR LED—IR LED used to transmit commands to the monitor
R Reem moottee C Coonnttrrooll
1. (S/T)—use these buttons to adjust the selected setting on the MENU screen.
2. SOURCE—press this button to select the video source (AV1/AV2).
3. MENU—press this button to display the MENU screen. Continue to press this
button additional times to scroll through the MENU selections.
4. POWER—press this button to turn power on or off to the unit.
© 2004 Directed Electronics, Inc.
7 7