Directed Electronics HVM702A User Manual

Page 10

DIIO

OLLU

MEE: 0–15

ASSSS: ON OFF

UTTEE: ON OFF

H//P

P: A-CH B-CH — This setting allows the use of 2 headphones on

different frequencies. If two video units are installed and; for example,
each unit is playing a different video, using two headphones set at the
same frequency may result in interference of the audio signal between the
two headphones. One of the video units should be set to A-CH and the
other to B-CH. A-CH is 2.3MHz left and 2.8MHz right, B-CH is 3.2MHz left
and 3.8MHz right. Ensure that the headphones being used are of different
receive frequencies, or are capable of 2-channel reception.

OTTEE:: In the Mode selection use the

S/T

buttons to select the desired setting and

press SEL to set the selected video mode.

FFU

ULLLL —

— A 4:3 picture is enlarged in the horizontal

direction only, enabling viewing of a 4:3
picture (standard picture) without any clipping of
the picture.

4::3

3 —

— Standard picture mode.

WIID

DEE —

— A 4:3 picture is enlarged in the same pro-

portion both vertically and horizontally. This setting
is ideal for cinema-sized pictures (wide-screen).

DIIS

ALL//N

NTT: PAL NT — video format (PAL or NTSC)

P//D

N: UP DN — picture is inverted

LLEETT//R

RIITT: LET RIT — picture is mirrored imaged (left-right swapped)