Denon CDR-W1500 - Manual (Page 19)

ENGLISH
19
4. Fade-in and fade-out recording
★ It is possible to record by gradually increasing the volume (fade-in) or decreasing it (fade-out).
(1) Fade-in recording
✽ Also refer to “Setup Method (5) Fade-in time setting” (Page 12).
1
2
Perform the procedure at “Manual recording” step 1 to 8 (Page 16).
Start playing the selection you want to record on the CD player, cassette deck, etc.
3
Press the fader button on the remote control unit.
• “Fade In” is displayed, and “FADE” flashes during the fade in operation.
• The recorded sound is gradually increased from a recording level of –
∞ to the set recording level in the set time.
(2) Fade-out recording
✽ Also refer to “Setup Method (6) Fade-out time setting” (Page 12).
1
During recording, press the fader button on the remote control unit.
• “Fade Out” is displayed, and “FADE” flashes during the fade out operation.
• The recorded sound is gradually decreased from the set recording level to a recording level of -–
∞ in the set time.
12 NORMAL PLAYBACK
1. Starting playback
First try playing the tracks in order.
OPEN / CLOSE
TIME TIME CLEAR INPUT
MENU
5
OPEN /CLOSE
5
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500
PHONES PHONES LEVEL
MIN MAX
POWER ON OFF
FINALIZE
MULTI JOG
3 1 2 3 1 2
PLAY STOP PAUSE
HIGH NORMAL DUBBING 8 9
RELAY MODE
DISPLAY
SELECT TITLE / CHARACTER
PUSH ENTER
8 9
PLAY STOP PAUSE
4 REC
- +
REMOTE SENSOR
STOP PAUSE PLAY
2
4
3
7 8
5 6
1
9
10 + 10
REC
_ DUBBING _
NORMAL HIGH RELAY
MODE
CD CD-R
ENTER
MENU
8 9
3 2
6 7
PROG/DIRECT CALL
RANDOM
DISPLAY SEL. FADER INPUT FINALIZE
1 / ALL A - B
CHARACTER TIME TITLE
M M
CLEAR CLEAR
A ! " A ! "
J J
D # % D # % G & ' G & '
P P ,
Y Y V V : ; S S .
[ = ] [ = ] { ? }
2 3
1 1
1 1 2 3
3
2
1 Load the disc to be played.
2
• Press the PLAY button ( 1 ) to start CD play.
• “ 1 ”lights up and the track number and track time of the track in play appear on the display.
• Press the TIME button once, twice or three times to see:
Remaining track time, total remaining time, elapsed track time.
NOTE:
• “No Disc” will be displayed at such times as when a disc is not loaded, the disc cannot be read properly due to
scratches or dirt, or the disc is loaded upside down.
2. Starting playback
3
Press the stop button ( 2 STOP).
• Playback stops.
• The stop mode is set automatically once all the tracks on the disc have been played.
(Main unit)
Select the deck to be operated.
(Remote control unit)
NOTE:
• The fade in/out recording function does not work in the synchro or copy recording modes. Record manually if you want to
use the fade in/out function.