Setup method, English – Denon CDR-W1500 User Manual
Page 10
STOP
PAUSE
PLAY
2
4
3
7
8
5
6
1
9
10
+
10
REC
_
DUBBING
_
NORMAL
HIGH
RELAY
MODE
CD CD-R
ENTER
MENU
8
9
3
2
6
7
PROG/DIRECT CALL
RANDOM
DISPLAY SEL. FADER INPUT
FINALIZE
1 / ALL
A - B
CHARACTER
TIME
TITLE
B
REMOTE CONTROL UNIT RC-278
M
M
CLEAR
CLEAR
A ! "
A ! "
J
J
D # %
D # %
G & '
G & '
P
P
,
Y
Y
V
V
:
;
S
S
.
[ = ]
[ = ]
{ ? }
ENGLISH
10
2
Inserting Disc
q Press the OPEN/CLOSE button (
5
) to open the disc tray.
w Insert a disc in the appropriate recess in the tray, label side
up.
e Press the OPEN/CLOSE button (
5
) to close the tray.
• “Close” lights up, followed by “TOC Reading”
and the display will show the type of disc you inserted.
• If you insert a blank or partly-recorded CD-R or
unfinalized CD-RW, the CD recorder will calibrate the
disc for optimum recording. During this process the
display will first show “Now OPC” and then the
number of audio tracks. Calibration can take up to 60
seconds. (CD-R/RW)
• If a CD-R/RW is finalized it will show “CD” on the
display.
Recess
Disc tray
NOTES:
• If your finger should get caught in the disc tray when it closes, press the OPEN/CLOSE button (
5
).
• Only Audio CDs will be accepted. If a non-audio disc is inserted, the display shows “Use Audio CD”.
• For recording it is important that the blank disc is completely free from dust particles or scratches. See “Disc cleaning”
on Page 6.
• When text information is entered but not finalized, the disc holder will not open until all of the text information has been
deleted.
“Text Erase OK?” will be displayed for 2 seconds. When the enter button is pressed during this interval, the text
information will be deleted and the disc holder can be opened.
Names and Functions of Remote Control Unit Buttons
2
Buttons not explained here function in the same way as the corresponding buttons on the main unit.
2
Buttons marked “✽” function regardless of the function selector switch.
Play button (
1
PLAY)
Pause button (
3
PAUSE)
Repeat A - B button (A - B)
Stop button (
2
STOP)
Record button (
4
REC)
Automatic search reverse
and forward buttons (
8
and
9
)
Manual search reverse and
forward buttons (
6
and
7
)
Random button (RANDOM)
Press this button to play the track
in random order.
(See Page 22.)
Display select button
(DISPLAY SEL.)
Press this to perform A-B repeat
playback.
Repeat 1/ALL button (1/ALL)
Press this to perform 1-track
repeat playback and all-track
repeat playback.
Character button
(CHARACTER)
Finalize button (FINALIZE)
Number buttons (1 to 10)
Use these buttons for direct
search and programmed playback.
Normal speed dubbing
mode button (DUBBING
NORMAL)
High speed dubbing
mode button (DUBBING
HIGH)
Relay mode button
(RELAY MODE)
Function selector
switch
+10 button
Use this button to enter track
numbers of 11 or over for direct
search and programmed playback.
Call button (CALL)
Use this button to check the
programmed tracks.
Program/direct button
(PROG/DIRECT)
Press this button to switch
between the program setting
mode and the direct search mode.
Normally this is set to the direct
search mode.
Clear button (CLEAR)
Menu button (MENU)
Enter button (ENTER)
✽
✽
✽
✽
Switches the operation of
the buttons between the
CD and CD-R.
✽
✽
Title button (TITLE)
Press this button to switch the
time display to the title display.
Input select button (INPUT)
Time button (TIME)
Fader button (FADER)
Press this for fade-in and fade-out
recording.
9
SETUP METHOD
★ The 9 items listed below can be set with the setup menu. The following messages will be displayed for the various setting
items.
• Close the disc trays and set the stop mode for both the CD and CD-R sections.
• The contents of the set menu are stored, but this data might be lost if the unit is disconnected from the power source for 2 to 3
days.
q “Sync. Rec?”…………………………………………… Synchro recording mode.
w “Sync. Level?” ……………………………………… Synchro recording level.
e “A.T. Mark?”…………………………………………… Auto track mark.
r “FadeIn Time?” ……………………………………… Fade-in recording time.
t “FadeOutTime?”
…………………………………… Fade-out recording time.
y “Intro Time?”………………………………………… Scan recording intro time.
u “Custom Index” ……………………………………… Custom index.
i “Skip Play?”…………………………………………… Skip play.
o “Timer Play?”………………………………………… Timer playback.
OPEN/CLOSE button
(
5
)