BIXOLON SRP-150 - Manual (Page 36)

Rev. 1.08 - 36 -
SRP-150
GS * x y d1...d (x X y X 8)
[Name] To define the download bit image
[Type] ASCII
GS * x y d1...d (x X y X 8)
HEX 1D 2A x y d1...d (x X y X 8)
DECIMAL 29 42 x y d1...d (x X y X 8)
[Range] 1 ≤ x ≤ 255
1 ≤ y ≤ 48 where, x x y ≤1536
0 ≤ d ≤ 255
[Description] Download bit image is used as clear dot by x and y.
- x: number of dots in horizontal direction
- y: number of dots in vertical direction (download bit image printing)
GS / m
[Name] To print download bit image
[Type] ASCII
GS / m
HEX 1D 2F m
DECIMAL 29 47 m
[Range] 0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Description] The printing of download bit image is used as a clear mode by m.
Mode is selected by m as shown in the following table.
m Mode Vertical Dot Density Horizontal Dot Density
0,48 Normal 200 DPI 200 DPI
1,49
Two times horizontal
magnification
200 DPI 100 DPI
2,50
Two times vertical
magnification
100 DPI 200 DPI
3,51
Overall two times
magnification
100 DPI 100 DPI
GS :
[Name] To define beginning/end of macro
[Type] ASCII
GS :
HEX 1D 3A
DECIMAL 29 58
[Description] To define beginning/end of macro
GS B n
[Name] Black and White switching printer mode on/off
[Type] ASCII
GS B n
HEX 1D 42 n
DECIMAL 29 66 n
[Range] 0 ≤n ≤255
[Description] Black and White switching printer mode
- Black and White switching mode is OFF when LSB is 0
- Black and White switching mode is ON when LSB is 1