AXING SKQ 4-01 User Manual
Page 5
Operation Instructions SKQ 4-01
Chapter 1: Common
12.09.11
© AXING AG • Swizzerland • Reserving change in design and type - We cannot be held liable for printing error
5
1.2.1
Display elements and connections
1.
Control switch to program channel 1+2 (left) or channel 3+4 (right). The switch must be set to
middle position when programming is ready
2.
Channel number (CCIR)
3.
Cable-TV S channel indicator led
4.
The signal led shows that the unit is powered
5.
IR detector
6.
LNB IN
7.
USB port is for possible software update
8.
Signal led indicates that receiver is locked to selected transport stream
a = sub tuner 1
b = main tuner 1
c = sub tuner 2
d = main tuner 2
9.
Bit rate indicator.
Red= overload
Green = under maximum
10.
Video (c), Audio L (b), Audio R (a)
11.
DC IN (only in stand-alone installation)
12.
RF OUT + DC IN in SKS XX-XX system installation
13.
Grounding screw
14.
Fan
Fig. 2: Display elements and
connections