AVUE ADR9600HE – 8/16 Channel Professional 960H/700 TVL Real Time 1U DVR - Manual (Page 25)

DVR User Manual
20
4.3.4 Stamp
This provides an option to enable or disable the Camera Name and the Time stamp on the
video. The user can also choose a position for the stamp on the screen.
To setup stamp as follows:
Step 1: Enter into Menu SetupRecordStamp interface. Refer to Fig 4-14:
Fig 4-14 Record Configuration-Stamp
Step 2: Checkmark camera name and time stamp. Click Setting button to setup the position of
the stamp. You can drag the camera name and time stamp at random positions. Refer to below
Figures:
Before drag After drag
Step 3: Select “All” to setup all channels with the same parameters.
4.3.5 Recycle Record
This option is used to recycle the HDD space once it is full. If enabled, the system will
automatically delete the old records and recycle the space if it is completely utilized. The
setting steps are as follows:
Step 1: Enter into MenuSetupRecord Recycle Record interface;
Step 2: Checkmark recycle record to activate auto recycling. If the option is disabled or not
selected, the DVR would stop recording once HDD is full.
Step 3: Click “Apply” button to save the setting.