AVUE ADR9600HE – 8/16 Channel Professional 960H/700 TVL Real Time 1U DVR - Manual (Page 21)

DVR User Manual
16
Step 2: In this interface, you can adjust brightness, hue, saturation and contrast in live. Click
“OK” button to save the setting.
4.2.2 Main Monitor
The main monitor settings allow you to set camera sequence in live display mode.
Operate the following steps to set main monitor:
Step 1: Enter into MenuSetupLive Main Monitor interface. Refer to Fig 4-8:
Fig 4-8 Live Configuration-Main Monitor
Step 2: Select display mode and channel.
Step 3: Select dwell time. Click button to setup the previous channel groups of dwell
picture. Click button to set the latter channel groups of dwell picture.
Step 4: Click “Apply” to save the setting.
4.2.3 Spot
Step 1: Enter into MenuSetupLive Spot interface. Refer to Fig 4-9:
Step 2: Select channel. Click button to setup the previous channel of dwell picture. Click
button to set the latter channel of dwell picture.
Step 3: Click “Apply” button to save the setting.
Fig 4-9 Live Configuration-Spot