AVUE G65-WB27N – High Speed Outdoor PTZ with 27X Zoom - Manual (Page 9)

System Setting
In system setting menu, you can modify operation and
display setting, such as dome label, temperature and
display of various value on the operational screen.
EDIT DOME LABEL
LABEL
BACK
EXIT
： ENTRANCE
INITIAL INFO
SPEED DOME V1.00
PROTOCOL：FACTORY
DOME ADDRESS：001
COMM：4800,N,8,1
BACK
EXIT
6.OSD - System Setting 6.OSD - Motion, Clear
Initial information:
Shows the information about current setting.
Dome Label:
1. use UP or DOWN to change the charactor.
2. use RIGHT to move to next char.
3. use RIGHT to move to last char and save.
4. use Left to first char and cancel.
Display setup
Dome label:
Preset label:
Zoom label:
Zone label:
Direction label:
Temperature label:
Actuvate the display for the on-screen info in
operaton mode.
the name of dome
shows the labe of every preset
shows zoom factor on screen
shows the zone name
shows the coordinates
shows the cur. temp in the speed dome
DISPLAY SETUP
DOME LABEL OFF
PRESET LABEL OFF
ZOOM LABEL ON
ZONE LABEL OFF
DIRECTION LABEL ON
LABEL OFF
BACK
EXIT
TEMPRATURE
Some products may not be available in your country, please contact our distributor for more details Some products may not be available in your country, please contact our distributor for more details
13 14
ENGLISH
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
MOTION Motion control
AUTO FLIP
PROPORTIONAL PAN:
PARK TIME:
: Auto. Image flip in tilt range from 90° to
180°
depends on the zoom factor,
the dome will adjust the pan and tilt speed
automatically for comfortable viewing.
defines the idle time prior to start a
custom defined action( park action).The range is
from 1 to 240 minutes. This function can be
deactivated by setting the minute to 0.
PARK ACTION:
POWER UP ACTION:
the action which will be started after
the idle time (park time). Selectable between Preset,
Scan, Pattern (Nr), Tour or None.
defines the action which will
be started after power up and self test. Selectable
between Auto,Preset 1, Scan, Pattern (Nr), Tour or
None. By selecting Auto, the dome will resume the
last action before power off.
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME 005
PARK ACTION SCAN
POWER UP ACTION AUTO
BACK
EXIT
Clear
You can clear setting’s memory or reset the
camear to factory default. The follwing functions
are supported:
- Clear Zones
- Clear all presets
- Clear all patterns
- Clear all tours
- Clear all windows
- Factory defaults
Warning: The clear action can not be
undone. once a item is cleared it is
impossible to retrieve the deleted setting.
Please make sure that the requested clear
action is desired.
CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL TOURS
CLEAR ALL WINDOWS
FACTORY DEFAULTS
RESTART
BACK
EXIT
O
NEW PASSWORD
: ******
ENABLE PASSWORD OFF
BACK
EXIT
LD PASSWORD : ******
CONF PASSWORD : ******
PASSWORD SETUP
Password setup
You can change password to access the OSD menu.
Default Password is 000000.
TIME ´00:00:00
DATE 01/01/01
DAY MON
BACK
EXIT
CLOCK SETTING
Clock setting
Some function like Auto-Tracking require the timer for
activation.
Time:
HH:MM:SS
DATE: YY/MM/DD
DAY: MON-SUN