Osd - camera setting osd - preset, scan, English – AVUE G65-WB27N – High Speed Outdoor PTZ with 27X Zoom User Manual

Page 10

Camera setting

ZOOM SPEED:

DIGITAL ZOOM:

BLC MODE:

SLOW SHUTTER:

WDR:

In camera setting menu, you can setup camera module
related settings. please note that depends on module’s
capability, some function may not available. please contact
your local sales representative for detailed information.

defines the speed when performing zoom

function.

Activate or deactivate the digital zoom

function of the camera module.

Select the Back Light Compensation mode,

improves the image when an object has strong back light.

Activates the Slow Shutter function of the

camera, which provides a higher light sensibility in low-
environment.

Activates the Wide Dynamic Range function, which

improves the image contrast when an object has very strong
light on background. Only available with camera modules
with WDR.

OSD - Camera Setting

OSD - Preset, Scan

CAMERA SETTING

ZOOM SPEED

HIGH

DIGITAL ZOOM

BLC MODE

OFF

SLOW SHUTTER

LINE SYNC

N/A

WDR MODE

N/A

ADVANCE SETTING 1
ADVANCE SETTING 2
BACK
EXIT

ADVANCE SETTING 2

AE MODE

AUTO

SHUTTER

N/A

IRIS

N/A

BRIGHT

N/A

WB MODE

AUTO

R GAIN

N/A

B GAIN

N/A

HI-RESOLUTION

OFF

BACK
EXIT

Advanced setting 2

AE MODE:

WB MODE:

ALC, PLC:

Under the advanced setting, you can make
improvements to image quality due to different
environmental conditions.

Auto Exposure mode. Depends on the light

condition in the surveillance area, you can set the AE in
different modes and adjust the parameters, such as
shutter speed, iris factor and brightness for the best
image quality.

White balance mode, a image improvement

based on DSP processing. you can also adjust the Red-
Gain or Blue-Gain to change the color tone.

Average and Peak Level Control,

additional setting to WB function. only avialble with
dedicated camera modules.

Function setting

In function setting menu, you can define and activate
different PTZ funcitons, such as preset points, auto
scan, tours and Pattern. Presets and tour functions
can also be set or activated directly from keyboard
device without OSD. Please refer to the keyboard’s
manual for operation details.

EDIT PRESET LABEL

LABEL
BACK
EXIT

：ROOM 1

PRESETS:

PRESET NUMBER:

SET PRESET:

SHOW PRESET:

CLEAR PRESET:

EDIT PRESET LABEL:

G65-70 Series supports up to

128 presets. The number can be selected from 0 to
128.

Defining the preset points directly in

OSD by entering this menu item and move the PTZ.
press IRIS-OPEN key on the keyboard to save. If the
preset is pointed within digital zoom, it will
automatically go back to max. optical zoom range in
order to provide the best image.

Moves to current preset point

Clear the current preset

For the current preset, you

can define a name which will be shon on the
operation screen once the preset is called. please
choose the preset number at first. The avaialbe
characters are: 0-9, A-Z, <,>,. and space.

PRESETS

P R E S E T N U M B E R

0 0 1

S E T P R E S E T
S H O W P R E S E T
C L E A R P R E S E T
E D I T P R E S E T L A B E L
B A C K
E X I T

SCAN

SCAN NUMBER:

SCAN SPEED:

SET LEFT LIMIT:

SET RIGHT LIMIT:

CLEAR SCAN:

RUN SCAN:

EDIT SCAN LABEL:

The SCAN function moves the PTZ between 2-
predefined points in constant speed.The
following parameters can be set:

cruising speed between the

points.

defines the left point.

defines the right point

Delete the scan setting

starting the scan function

set the name for the scan

G65-70 Series supports up to 4

scan.

SCAN

SCAN NUMBER 01
SCAN SPEED

SET LEFT LIMIT
SET RIGHT LIMIT

RUN SCAN
EDIT SCAN LABEL
BACK
EXIT

CLEAR SCAN

Some products may not be available in your country, please contact our distributor for more details

ENGLISH

ADVANCE SETTING 1

IR CUTTER FILTER

AUTO

IR CUT ON TIME

N/A

IR CUT OFF TIME

N/A

MAX GAIN

28dB

BACK
EXIT

Advanced setting 1

IR CUT FILTER:

Max Gain:

Enables the removal of Infrared Cutter

Filter (IRC), also known as “DAY/NIGHT” mode. with the
removal of IRC, the camera turns into Black/White mode and
has higher sensibility to low-light or IR-Light in the night.
Selectable between On, Off, Auto or Time. Only available
on camera module with IRC function.

improve the image quality in the Night modus

FUNCTION SETTING

PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
AUTO-TRACKING
BACK
EXIT

This manual is related to the following products:

G65-WB37N – High Speed Outdoor PTZ with 37X Zoom