AVUE G65-WB27N – High Speed Outdoor PTZ with 27X Zoom - Manual (Page 5)

4.INSTALLATION
Connector description
The wiring cable of G65 and G70 provides connectors for power supply, video and I/O
interface
Power
Connector
RS 485
Connector
RJ-11
Video output
BNC
Alarm I/O
RED : AC 24V
BLACK : AC 24V
To power supply
YELLOW : RS485 -
GREEN : RS 485 +
To keyboard or DVR devices for
telemetric control
RED : Alarm in 1
PINK : Alarm in 2
YELLOW :
GREEN :
BLACK : COM
WHITE : Alarm output - N.O
BLUE : Alarm output - N.C
AQUA
Alarm in 3
Alarm in 4
:
I/O interface to additional alarm
Alarm output - N.C2
BROWN : Alarm output - N.O2
GRAY : Alarm in 7
PURPLE : Alarm in 6
ORANGE : Alarm in 5
Inner Conn : Signal +
Outer Conn : Ground
Video Output to monitor or DVR
Using optional accessories
The G65 and G70 speed dome cameras can be connected to various optional
accessories through the standard connector types, which simplifiy the cable handling
and avoids possible mistakes. All accessories are tested for max. compatibility and
best performance.
AU-WP20
Outdoor power adaptor box
AC 230V to AC 24V
AC 24 Power
supply
RS 485
Alarm I/O
AC 230V
Power input
AU-S20
Indoor power adaptor
AC 230V to AC 24V
AU-
S20
AC 230V
Power input
AC 24 Power supply
AU-KB3N
3-Axis keyboard
controller
RS 485
Telemetric control
camera setup
AU-JD2028
21”High Res.
security Monitor.
AU-DVRH-16/400
Professional Real-time
16 Channel DVR
Video signal
RS 485 cable
The telemetric control of the appliance uses Rs485 serial communication with half-
duplex transmission technology.
Depends on the cable typeand baud rate, the transmission distance could vary. The
following table shows max. distances based on cable with 0,56mm (24AWG) twisted
pair:
2400 bps
1100 m
700m
4oom
4800 bps
1700m
9600 bps
19200 bps
Baud Rate Max. Distance Due the environmental interferences, such as
eletromagnetic and induction fields, or number of
connected appliance on the RS-485 bus, the
transmission range may be less, e.g with cable thinner
than than 24AWG.
4.INSTALLATION
5 6
ENGLISH
KB3N
Alarm I/O