DirecTV H10 - Manual (Page 18)

14
Making the Right Connections
Ready to connect your DIRECTV ® HD Receiver and your other components?
Whether you’re having your system professionally installed or handling it
yourself, be sure to read over the following few pages to familiarize yourself
with some important tips for safety and care.
Before you begin
Your satellite dish antenna must be installed before you can begin following the procedures
in this User Guide. (Professional installation is highly recommended.) Your dish needs to
be mounted in a position where it has access to the satellite signals, and RG-6 coaxial cables
must be run into the room(s) where your receiver(s) will be located. If you choose to install
the dish yourself, see the separate instruction manual that came with your satellite dish
antenna.
Package Contents
The following items are included with your DIRECTV HD Receiver:
4 A/V cables (RCA type) 4 Access card
4 S-Video cable 4 User Guide
4 Phone cord 4 RF/IR Remote with 2 batteries
4 Power cord 4 Component Video cables (YPbPr)
4 RF Remote antenna
Making the Right Connections
Getting Connected
POWER
DIRECTV®HD Receiver H10