Atlona AT HDAIR - Manual (Page 31)

www.atlona.com | toll free: 1-877-536-3976
For International: 1- 408-962-0515
31
Problem/Question Symptoms Solution
For more Display
Adapter tips and
information:
Please refer to the Support Knowledgebase
section of the DisplayLink website for more
specific information and answers to ques-
tions:
www.displaylink.com/support/knowledge-
base.php
For basic definitions, see the Frequently
Asked Questions:
www.displaylink.com/setup_faqs.html.
Audio is not syn-
chronized with the
video
When you play a video, the audio part of the
playback may not be synchronized with the
video playback.
Change the active power plan to
‘Always On’ or to ‘Balanced’ or to
‘High Performance’.
XP: Click Start, select Control
Panel. Click Power Options.
Under Power Schemes select
Always On.
Vista: Click Start, type power
in the Start Search box, and
then click Power Options in the
Programs list. Under Select a
power plan, click Balanced or
click High performance.
No Audio on the
remote speakers
connected to the
A/V Adapter
When you play a video and the audio
part of the playback is heard from the PC
speakers and not from the remote speak-
ers.
Make sure you have connected
the remote speakers to the
3.5mm audio port.
On the media player press
Stop and then Play to restart
the video. Please see Sec. ‎5.5
Setting Audio Output Device for
further details.
Channel busy mes-
sage displays when
I try to change the
channel
Note: manual chan-
nel selection may
be restricted by
local communication
regulation laws.
External radio interference may exist close to
the PC/device
Channel selection SW may have failed
• Another wireless system may
be in use in proximity to the
PC or device environment, and
may cause temporary inter-
ference to the wireless USB
system. Try to select a different
channel (where applicable - lo-
cal regulatory restrictions may
apply)
• Close the message box,
detach the PC Adapter from
your PC and re-attach it. If the
message displays again, try to
change the channel again.