Atlona AT PCLINK - Manual (Page 32)

31 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
The PC Adapter and Device Adapter in this set are already paired and do not require performing a pairing
procedure. If you should need to perform pairing manually for any reason (e.g. connecting to a new host PC
Adapter, or adding a Device Adapter that was not purchased in a set), please follow these steps:
To perform Pairing:
1. Ensure that a Wireless USB Host or PC Adapter is connected to the PC.
2. Remove the Device Adapter from the Docking Base and connect it directly to the host PC USB port, do
not use the Docking Base or any other accessory to connect to the PC.
3. Upon first time connection of a Device Adapter to the PC, the Pairing driver is installed automatically.
4. Once the Pairing driver is installed, pairing is automatically performed between the host PC and the
Device Adapter, and the following confirmation message is displayed:
Windows VISTA Windows XP
APPENDIX B: PAIRING PROCEDURE