Applied Motion Si2035 - Manual (Page 4)

4 4 4 4 4
Si2035 Hardware Manual Si2035 Hardware Manual Si2035 Hardware Manual Si2035 Hardware Manual Si2035 Hardware Manual
Block Diagram
Introduction Introduction Introduction Introduction Introduction
Thank you for selecting an Applied Motion Products motor control. We hope our dedication
to performance, quality and economy will make your motion control project successful.
If there's anything we can do to improve our products or help you use them better, please
call or fax. We'd like to hear from you. Our phone number is (800) 525-1609 or you can
reach us by fax at (831) 761-6544. You can also email [email protected].
Si2035 Features
• Programmable step motor driver in complete fully featured package
• Built-in 30 volt DC power supply.
• Drive connects to a 120 or 240 Volt AC input, single phase, 50/60 Hz
• 8 optically isolated digital inputs for connecting end of travel limits, sensors, etc.
• 4 optically isolated programmable outputs for coordinating external equipment
• Motor current from 0.2 to 2.0 amps/phase
• 0-5V analog input (currently supported by SCL only)
• microstepping to 50,800 steps per revolution.
• Powerful, flexible, easy to use indexer.
• Connects by a simple cable to your PC for programming (cable included).
• Microsoft Windows
TM -based software for easy setup and programming
• In Si™ mode, operates stand alone, running internally stored programs
• In SCL mode, accepts real time commands and queries from a host PC or PLC
• Compact 1.75 x 6.8 x 4 inch overall dimensions.
• Optional man machine interface (MMI) allows operator to enter distances,
speeds, cycle counts and more.
).
).
).
).
).#7*/'
).##7*/'
).#7,)-
).##7,)-
TO
/54
/54
/54
/54
iÔ
Y „Šˆ ‚‚{ˆ
3TATUS
34%0
)NTERNAL
,OGIC
3UPPLY
23
!#
0OWER
#ONVERTER
/PTICAL
)SOLATION
07-
0OWER
!MPLIFIER
/PTICAL
)SOLATION