Technical specifications, Mating connectors and accessories – Applied Motion Si2035 User Manual

Page 17

Si2035 Hardware Manual

Dual, microstepping bipolar recirculating H-bridge, pulse width modulated
switching at 20 kHz. 0.2 - 2.0 amps/phase output current, software pro-
grammable. 50 watts maximum output power. Automatic idle current
reduction. Min. motor inductance 1 mH.

110 or 220 VAC input, switch selectable. 50 - 60 Hz. 75 W max. DC
voltage at nominal line voltage: 28 VDC full load, 40 VDC no load.

8, optically isolated, 2200 ohms input, 12 - 24 VDC.

4, Optically isolated, uncommitted (open collector, open emitter)
darlington photo transistor. 30V, 100 mA max.

Constructed on black anodized aluminum heat transfer plate. Covered by
heavy gauge ventilated steel housing. 1.75 x 4.0 x 6.8 inches overall.
Power on/status LED. See drawing on back cover for more information.
Ambient temperature range: 0 - 50°C.

1A UL rated, fast acting, TR5 style. Available from Digikey (800-DIGIKEY)
as part number WK3048BK.

Technical Specifications

echnical Specifications

Amplifier

Power Supply

Digital Inputs

Digital Outputs

Physical

Fuse

Mating Connectors and Accessories

Mating Connectors
Motor: Mating connector included. Phoenix P/N 1753075.
AC Power: Phoenix P/N 1832536. Included with drive.
IN/OUT: DB-25 female. Mating connector included, NORCOMP P/N 171-025-202-001.
Shell Kit: AMP P/N748678-3 (included).

Accessories
Breakout Box for IN/OUT Connector: BOB-2, includes cable

Screw Terminal Connectors that mate directly to the IN/OUT connector on the front panel of
the drive: Phoenix Contact P/N

2761619

This connector is not available from Applied

Motion. You must purchase it from a

Phoenix distributor.

Mating Cable for IN/OUT connector with “flying leads”

Black Box P/N: BC00702.

This cable is not available from Applied Motion. You must

purchase it from

Black Box

Useful for custom wired applications. This shielded cable has

a DB-25 connector on each end. If you cut one end off it will provide a 6 foot “DB-25 to
flying lead cable” for the IN/OUT connector. It’ll be easier to wire if you get the

cable color

chart from Black Box’s web site

Surge Protector with Line Filter:

For 120VAC:

Leviton 51010-WM

For 220VAC:

Leviton 51240-WM