D-Link Wireless ADSL2/2+ 4-port Ethernet Router DSL-2640U - Manual (Page 8)

7
Configuring the Router
To use your web browser to access the web pages used to set up the router, your
computer must be configured to “Obtain an IP address automatically”, that is, you
must change the IP network settings of your computer so that it is a DHCP client. If
you are using Windows XP and do not know how to change your network settings,
skip ahead to Appendix A and read the instructions provided.
Open your web browser and enter
the URL http://192.168.1.1 in the
address bar and press Enter.
Enter “ admin ” in
the User Name field
and “
admin ” in the
Password field.
Click OK
NOTE: Actually, there are two default user name and password combinations. The
user / user name and password combination provides limited access to certain
configurations. The admin / admin combination can perform all functions. Passwords
can be changed at any time.